TuneECU can basically be used only on models which are listed in the compatibility list.
last update Januar-26-2017

Warning !!
Unfortunately we discovered that in the internet on some sites, illegal copies of our Android version be offered.
We can only warn against downloading these illegal copies

Download and install TuneECU for Android for your own safety, only from the Google Play Store.



Support is only for the software
(Android Version only), no advice or recommendation will be given on the use of maps. Except the brief descriptions available on the site,
no additional information will be provided on the maps, for any additional questions,  please ask in the appropriate forums.

Overview

                      
WARNING !! Use TuneECU ONLY for motorcycle listed on the compatibility list.

TuneECU Android

Warning: Use of this software solution under certain circumstance can invalidate your warranty.

Use of this software is at your own risk, no guarantee is implied or given,
either by the author(s) of this software, nor the website administrator. !!!!!!!!!!!

!! Damages of any kind caused by the use of this software are your own responsibility. !!

 

This addendum applies only to the function available on the Android version of TuneECU.
Refer to the manual TuneECU for additional information.

TuneECU for Android is available on the Play Store Google.

For safety ! -  Download the Android software exclusively on Google Play Store

Note: use the search term "tuneecu" in Store.


Technical Support
Your must enter a valid email address in the contact form, otherwise no answer is possible.
Support is only for the TuneECU software, no advice or recommendation will be given
on the use of maps.


To get support, the following information are required:

- A short description of the problem.
- Android device
- Android version
- TuneECU version
- What connection is used, Bluetooth or cable
- For Bluetooth problems: What a Bluetooth adapter is used? (Manufacturers and
  Software version)
- Charged Map
- Vehicle Type
- VIN
In TuneECU directory a trace.txt is generated, this trace file basically send you along
with the inquiry as ZIP- or RAR-file.


Without the above mentioned information, no support can be done.



1.Introduction:

TuneECU for Android is a software for reprogramming, diagnostics and testing of the engine
control unit (ECU) fitted to some motorcycles from Triumph,
KTM, Aprilia, Benelli, Ducati, Gilera,
Moto Guzzi,
BMW, CCM, Husqvarna & Moto Morini.

Models
TuneECU for Android can only be used on the following models.
Date of information
Triumph Daytona 675, only up to VIN # 564947 |via cable & Bluetooth* August  2014
Triumph Daytona 675, from VIN # 564948 | *Bluetooth connection only August  2014
Triumph Street Triple & Street Triple R, only up to VIN # 560476 | via cable & Bluetooth* August  2014
Triumph Street Triple & Street Triple R, from VIN # 560477 | *Bluetooth connection only  August  2014
Triumph Speed Triple models 885, 955, 1050 & 1050 R (including models 2014)|via cable & Bluetooth* August  2014
Triumph Tiger models 800/800XC, 885 (900), 955, 1050 & Tiger Sport (including models 2014)   | via cable & Bluetooth*
Triumph Tiger Sport 2016 (from VIN750470) only via Bluetooth and TuneECU for Android.
October 2016
Tiger Explorer / *Bluetooth connection only August  2014
Triumph 955 Sprint ST/RS models and 1050 Sprint ST/GT  (including models 2013)|via cable & Bluetooth* August  2014
Triumph Daytona models T595/955i Daytona (all models) |via cable & Bluetooth* August  2014
Triumph Rocket III  (all model years) |via cable & Bluetooth*  June      2015
Triumph Daytona 600, 650, Speed Four, TT600 (all models) |via cable & Bluetooth* August  2014
Triumph Thunderbird (1600 & 1700 cc) , Thunderbird Storm including models 2015,
 except Commander and LT |via cable & Bluetooth* 
America,  Speedmaster,  (including models 2014) via cable & Bluetooth*
Bonneville, Scrambler, Thruxton  (including models 2015)| via cable & Bluetooth*
August  2015
KTM 990 LC8 & 1190 RC8 (including models 2012)/via cable & Bluetooth*
KTM 690 Duke  (including models 2011)/via cable & Bluetooth* (except all Duke 4 models
KTM 690 SMC & Enduro/690 Supermoto (including models 2013)|via cable & Bluetooth*
August  2014
Aprilia models Caponord and Futura RST/via cable & Bluetooth* August  2014
Benelli Tornado models (Sagem ECU) |via cable & Bluetooth* August  2014
Benelli TNT & TREK models (only with a special USB/RS232 FTDI converter cable). May       2015
Ducati # 749, 848, 999, 1098, 1198 |via cable & Bluetooth*
# ECU 5AMHW610 Ducati models are only supported by TuneECU for Android
March   2015
Ducati StreetFighter 848 & 1098  | via cable & Bluetooth*
# ECU 5AMHW610 Ducati models are only supported by TuneECU for Android
March    2015
Ducati # Monster 620, 695, S2R 800/1000 & S4R |via cable & Bluetooth*
# ECU 5AMHW610 Ducati models are only supported by TuneECU for Android
March    2015
Ducati # Hypermotard 1100 (not EVO) |via cable & Bluetooth*
# ECU 5AMHW610 Ducati models are only supported by TuneECU for Android
March    2015
Ducati # Multistrada 1000 & 1100 |via cable & Bluetooth*
# ECU 5AMHW610 Ducati models are only supported by TuneECU for Android
March    2015
Ducati # ST3 & ST4 |via cable & Bluetooth*
# ECU 5AMHW610 Ducati models are only supported by TuneECU for Android
May       2015
Ducati # Sport Classic /via cable & Bluetooth*
# ECU 5AMHW610 Ducati models are only supported by TuneECU for Android
May       2015
Moto Guzzi Breva 1100, Moto Guzzi Griso 1100/1200, Moto Guzzi Norge 1200,
Moto Guzzi Stelvio 1200, Moto Guzzi 1200 Sport
# ECU 5AMHW610 Moto Guzzi models are only supported by TuneECU for Android
May       2015
Moto Morini Corsaro 1200, Moto Morini Avio, Moto Morini Granpasso 1200
Moto Morini 1200 Sport, Moto Morini 9 1/2
# ECU 5AMHW610 Moto Morini models are only supported by TuneECU for Android
Jun        2015
Gilera GP800
Gilera models are only supported by TuneECU for Android
March   2016
Husqvarna 449/511
Husqvarna models are only supported by TuneECU for Android
August  2016
BMW G450X
BMW models are only supported by TuneECU for Android
Sept.     2016
CCM 450
CCM models are only supported by TuneECU for Android
October 2016
With Bluetooth connection, reading and reprogramming map functions are not available.

1.1  Configuration required :

  •  Smartphone or Tablet Android version 4.0 minimum, dual Core 1.2 Ghz mini and OTG.
  •  Cable USB OBD2 FTDI (The cable is the same as the windows version)
  •  Adapter USB/micro (cable OTG) if needed.
  •  Optional: Interface Bluetooth ELM327, version 1.4 or 1.5.
  •  For the Walbro Benelli models, a special converter cable and AMP Super-Seal connector (6 pin)
     is still required, see here.
Devices tested:
  • Samsung Galaxy S2, S3, S4, S5 & S7
  • Samsung S4 Mini (Bluetooth only)
  • Acer A501 (not for Benelli Walboro ECU because insufficient power)
  • Samsung Galaxy Tab 3 (8 & 10’’)
  • Samsung Galaxy Tab 3 7’’ (Bluetooth only)
  • Samsung Galaxy Note3
  • Sony Xperia Z
  • Asus me371
  • Medion LifeTab S7852
  • Medion E4001 (Bluetooth only)

   This is not an exhaustive list.

Adapters Bluetooth tested

     This is not an exhaustive list.


References to other Android devices and Bluetooth adapter, which work with the Android version of TuneECU,
are gladly accepted. Contact

User comments on other Android devices and Bluetooth adapters

NEWS

1.2 Installation:

  • TuneECU is available on the Play Store Google.
  • A folder TuneECU is created during the TuneECU installation. The maps need to be copied
    on that folder for later use.

1.3 Utilization:

  • Connect the cable OBD (with OTG adapter if needed) to the Android device and to the ECU.
  • Open TuneECU and authorize the app to access the USB accessory
  • A connection with an Bluetooth OBD Adapter ELM327( Version 1.4+) can be used but not all functions
    of the software will be available.
The software has 3 screens: Map, Diagnostics and Adjustments. To switch between screens, swipe the screen from left to right or vice versa.
In “Map” mode, with a map open, the different tables can be displayed by swiping the screen up or down. From the “F” or “I” screen, the corresponding corrections F Trim table can be displayed by swiping towards the right.
ECU Connection:
  • Connect the cables
  • Turn on the ignition
  • In the “ECU” menu, select “Connect”. The light in the bottom right corner starts blinking:
  • Red – Initiating Connection to the ECU
  • Yellow – authentication
  • Green – Connection established
  • With the Bluetooth interface the LED blinks first in Blue showing the status of the connection
    with the Bluetooth device.

The three main Screens:

Map Screen:


Menu „ECU“
  • Connect / Disconnect : Connect or disconnect to the ECU.
  • Read Map: Read the map from the ECU
  • Reprogram: Write the map loaded in TuneECU to the motorcycle ECU. <<BE CAREFUL!>>
  • Information: Information about the ECU (VIN, Serial number, Map number)
Menu „EDIT“
  • Modify Table: Change of the characteristic maps in the tables.
    In sub menu select "modify table" mark one or several cells, wipe up or down to modify the values.
  • Copy / Paste: Copy or Paste the entire table.
  • Graphic Mode : Graphical or Numeric table display.
  • F Trim global : Use the F Trim table for all « F » tables
  • Commit trims: Apply each Trim table to the F & I table and reset the F Trim tables.
 Menu „Map“
  • Open: open a map from the TuneECU folder.
  • Import table PCIII/V : Import a table PCIII or V in the trim tables.
  • Information : Display the “Infos” / Comments from the map
  • Parameters: Miscellaneous setting for the Map (Rev limiter, SAI, O2 sensor, speed correction …) 



  • Parameters / Devices: Allow to active or deactivate for the map the « devices » (o2 Sensors, SAI…) 

     


Diagnostics Screen:

Menu „ECU“
  • Connect / Disconnect: Connect or disconnect to the ECU.
  • Error Codes: Display / Erase the error codes stored in the ECU
  • Information: Information about the ECU (VIN, Serial number, Map number)

                                      

             



Adjust Screen:

Menu „ECU“
  • Connect / Disconnect: Connect or disconnect to the ECU.
  • Error Codes: Display / Erase the error codes stored in the ECU
  • Tests & Adjustments: Test components (fuel pump, radiator fan, etc…)
  • Adjust :
    • Devices adjustments (Exhaust valve, Idle speed, …)
    • Reset Service Interval (exclusively with Bluetooth).
    • ABS Bleed feature, Triumph only.
New in Tuneecu, see red frame in the picture.



The left gauge shows the vacuum values for the cylinders to allow the butterfly synchronization
only for Keihin ECUs.

Einstellungen
.
 
 

             

       
PS: Not all features are available on all motorcycles.

Videos

Supported features for Ducati 848, 1098, 1198,
Hypermotard 1100, Monster S2R 800/1000 (ECU 5AM)




Features for the supported models Moto Guzzi and Moto Morini:
see Ducati.



Triumph models and / or functions that are not supported by the Windows version are now supported in the Android version via Bluetooth:



Appropriate equipment:



Converter Cable for Walbro ModelleAMP 6-Pin
NEWS 01-01-2017:
TuneECU Lite version is available in Google Play Store (only Bluetooth connection)
  • Highlight: ABS Bleed-Funktion
Update April-05-2016, Android Version:
What's New:
  •  "Unsupported ECU Type" bug fixed
Update Sep-15-2015
What's New:
  • Bugs fixed.
  • Adding a map for Guzzi Norge 1200.
Update Jul-15-2015, Android Version 2.6
What's New:
  • Triumph Map reading improved to avoid failures
  • Adding infos map Edition
Update Jun-25-2015 TuneECU Android 2.5
What's New:
  • Adding TPS Reset for IAW5AM ECU
  • Adding maps for Corsaro 1200 (1) & Ducati 1198S (1)
*Warning* There are currently a lot of clone ELM327 adapters (v2.1) circulating that are not working with TuneECU - You must use adapters v1.4 or 1.5.



User comments on other Android devices and Bluetooth adapters:

Clement from USA, writes: was able to pair Droid Razor Maxx with iDiagnose BT adapter from amazon. http://www.amazon.com/iDiagnose%C2%AE-Smallest-Bluetooth-Diagnostic-Wireless/dp/B00A1O72TW/ref=cm_cr_pr_pb_t
Seems to work fine with android tuneecu. Good combo of inexpensive adapter and phone.

Bixxer Bob from the Tiger Forum, http://www.tigertriple.com, writes the following:
Hi again Tom, the cable arrived and works fine using my HTC One M8.  I checked the test functions, and read the ECU map
which took about 4 minutes. I didn't write a map because it's running fine at the moment and I don't want to upset it. 
Everything works as it should.

Alx from the Triumph Forum http://www.triumphtorque.com , writes:
Everything appears to work, including diags, tests, map read (connected via USB cable to 2009 Thruxton)
Nexus (Galaxy Nexus ) ver 4.3
Nexus 7 (2013) KitKat 4.4.4)

UKDAYTONA from the Triumph Forum http://www.triumphrat.net , writes:
I bought all the necessary cables and tuned my Tona with my S4, works great. This sure makes life easy and I can tune
my bike anywhere.

Andrea from Italia writes:
Hello the Android version of tuneecu works fine on LG G2 and LG G3

Night Train from the Triumph Forum http://www.triumphrat.net , writes:
I thought that it was time for me to explore. Fortunately, it was a positive experience.
If you order the Lonelec Cable they give you the Android adapter for free.
I just paid for Android from Google and used the cable as is.
I downloaded the choice map and it worked easy peasy.
In fact, I was not able to make it work on my PC but with the Android ( I have a Samsung Galaxy S5 Active), it was so easy,
I thought I missed something. No, not at all. All is good and the way to go.

Claviger from the Triumph Rocket Forum, http://www.r3owners.net , writes:
Just want to confirm for you guys that the new Samsung Galaxy Note 4 works without issue to load tunes etc.
It's actually faster to load them using my phone than my laptop, the connection is faster as well to initiate than with the laptop,
good job!

Holzwurm from the german Triumph Rocket Forum, http://www.rocket3.de, writes:
With my HTC M8 with Android 4.4.4. Works fine, without any apparent problems.
Read and write map goes just as fast or slow as the laptop. The diagnosis and the setting screen is running fine.
This is a very functional tool for on the go to change maps, as also to read all error codes.
If you still stores the PDF with the DTC list on the phone, you can quickly isolate perhaps in the case of a case a problem.
Because the phone is always there and the cable can be stowed easily. Fine thing.

Oyvind from United-Kingdom writes:
TuneECU for Android works fine with my Samsung Galaxy Note 2 and Mini ELM327 V1,5 OBD2 II Bluetooth and the OBII cable with adapter USB/Micro (OTG). I ride a Triumph Tiger 1050 2009 mod. Using map 20546.

Guy from Canada writes:
TuneECU for android works beautifully with my 2014 Triumph Street Triple R using my Toshiba AT100 Tablet with a BAFX ELM327 Bluetooth adapter. Good job TuneECU team!

Adam from Australia writes:
TuneECU for Android worked perfectly for me on my 2015 Triumph Street Triple R using a Samsung Galaxy Tab 4 8.0 and
the BAFX OBD Interface as found here on Amazon: http://www.amazon.com/gp/product/B005NLQAHS

Erwin from Austria writes:
I bought your app, works great.
* Motorola Moto G 2nd Gen. Android 5.0.2 works with Cable
* Motorola Moto G 2nd Gen. Android 5.0.2 works via Bluetooth adapter (model I can not say unfortunately, there's no longer on ebay)

Umberto from Italia writes:
* connected with Huawei P7 and usb cable, perfect !!

Nikolay from Bulgaria writes:
* Hi, I bought the program and work with the phone CAT S50 Android 4.4.2 and Bluetooth OBD Adapter ELM327( Version 1.5 ).
* Aprilia Caponord ETV 1000 - 2004.

Anthony from Netherlands writes:
I have the android version working on my LG G2 phone and also on my samsung galaxy Tab 4 10.1 using a cable.

Michele from Italy writes:
* I tested the android version on a Tiger Explorer, works fine.
* Galaxy S3 Neo ( GT-I9301I) Android 4.4.2
* bluetooth adapter: Vgate V1.5 Mini OBD2.



Disclaimer:

Use of the software is at your own risk. Neither the software developer or the website operator will provide any form of guarantee.

!! Damages of any kind caused by the use of this software are your own responsibility. !!

back to top

All care has been taken in the creation of this page, however, the author
cannot guarantee  the completeness and accuracy of this information.

*** END ***